This 16HA Stepper motor (also known as NEMA 16 Series) is USED but fully operational prior to removal from their previous purpose (Stage Lighting Moving Head)
Ideal for low cost experimentation (Arduino etc) or possibly parts replacement.
Removed from the original stage moving head equipment because the equipment was was based on obsolete technology (metal halide lamps) which "cooked" the top cover (overheated due to fan failure) and made the equipment unserviceable but perfectly useable stepper motors and various gearing/lens and colour wheels were salvaged - separate advertisements for those components will follow.
RB STEPPER MOTOR
RB is a chinese stepper motor manufacturer (and other associated devices) with an ISO9001 rating for QC
Model: 16HA6005-13
Installed in this equipment around 2005 (although the equipment did not see heavy use)
Identification of the motor model (and lot number) is stamped into the diecast body
Complete with a long flying lead (4 wire) with molex connectors each end for ease of experimentation/fitting.
This is part of the NEMA 16 series steppers, faceplate is 39mm x 39mm making this NEMA 16 stepper slightly smaller face than the remaining NEMA 17 series steppers I have or had previously. I have provided a photograph of the physical dimensions of this motor.
Technical specifications for this EXACT model I have not been able to find and I do not have definitive specifications for the 16HA6005-13
It's a pretty safe bet that the following applies though (based on the other steppers in the equipment and their purpose(s)
2 Phase
Step angle 1.8 degrees
CONDITION:
Clean, bearings "feel" fine
TESTING:
Known to be fully operational prior to removal.
Great for robotic motion or mechanical movement experimentation
