Commonly used with Cisco 800 Series equipment
Delta Electronics AC Power Supply (brick)
Part number: ADP-29EB A
Australian safety standards approved
Input: 100 - 240V AC
Outputs:
+5.2V @ 4.4A
+12V @ 0.56A
Total power dissipation 26W
These power supplies have a 1.8m lead on the output, terminated with a 6 pin connector which mates into the back of the Cisco 800's
Tested and confirmed the DC outputs are within tolerance, while doing this I can confirm the pinouts are:
(Pin 1 is indicated on the plug casing)
Pin 1,2,3 Grnd (negative)
Pin 4,5 +5.2V
Pin 6 +12V
No damage to the AC lead or the DC lead nor the plug.
These use a figure 8 lead (also known as an IEC C7) for the AC input, I will supply this AC input lead if you don't already have one but YOU MUST ASK when purchasing.
