SUDER
DVD Laser assembly - complete
Model DV34 1200W mechanism
Laser optical unit is type SF HD65 (same as the SF HD850 electrically)
Made in China
Before using these you must desolder the anti-static bridge by desoldering the bridge which is located to the right of the ribbon connector, at the top - easy to access.
You should look very carefully at your own faulty laser optical pickup assembly and determine if this one will suit your machine - I WILL NOT ADVISE YOU ON THIS, IT IS YOUR RESPONSIBILITY TO CHECK COMPATIBILITY
The SF HD65 or HD850's which are commonly used with the DV34 transport and just a couple of manufacturers using these are Sanyo and Hitachi and I also know the optical system (SF HD65) is fine with the Denon 2930CI.
These optical laser pickup assemblies are brand new - in the original anti-static bag and original box
Normally you can expect these to be a "drop in" replacement, no special equipment or tools needed to align them as this has been done at the factory - AFTER you desolder the anti-static bridge.
If you love your DVD player and it has died on you (and they all do, eventually) then changing the laser assembly may be the way to go. If you haven't already tried it, first give your existing laser assembly a VERY GENTLE clean with a cotton bud dipped in diluted cleaning solution (water plus Iso alcohol, about 3 - 1 mix) and use the other end of the cotton bud to dry off the laser lens. If this doesn't help, then your laser most likely needs replacing.
