NEW Old Stock
Ex our R & D workshop spare parts but due to the build of this case, it was never used (not strong enough for our needs)
UNIDENTIFIED MANUFACTURER - Enclosure Case
Aluminium with a Matte Black finish
Screw assembled (8x screws top & bottom, 4x screws front & back)
Collapses to a "flat pack"
Folded sheet aluminium 1.7mm thick on all sides
NO prepunched holes other than the securing screws (which have mating sockets welded to the sheet metal) so you are starting with a "fresh slate" on all panels (front/rear/sides/top/bottom)
Comes with a packet of assembly screws and some nuts/bolts
DIMENSIONS:
433mm Wide x 251mm Depth x 84mm Height (close to 2RU)
WEIGHT: 1.2Kg
COMMENT: I feel this enclosure was manufactured for the "budget market" as the aluminium sheet is quite thin and although the integrity of the case is fine WHEN ASSEMBLED, I wouldn't want to drop this one - it is likely to bend quite easily. Probably not a great idea to install a heavy component inside either e.g heavy toroidal transformers would not be a good idea. It does fit together well, just not the strongest of cases (in my opinion)
COSMETIC CONDITION:
CLEAN
NO scratching
NO dents
Black finish is in good condition although it does show EVERY little bit of dust that settles on it!
I have now disassembled the unit into a flat pack (dead easy to assemble, no instructions required for most folk!) Each component of the case is protected in bubble-wrap to prevent any scratching while waiting for a new owner.
Shipping as a flat pack is also the most cost effective method of shipping (otherwise the buyer ends up paying for "air" because of the cubic dimensions used by shippers)
