Removed from professional laboratory equipment, fully functional - the photograph shows the display exactly as it was working immediately prior to removal from the equipment.
Futaba Corporation
Made in Japan
4 x 40 Vacuum Fluorescent Display
Display area: 173mm x 35mm
Module area: 203mm x 60mm
Bright green/blue display - easy to read in all light conditions
Includes blue filter
External interface: 26 way connector
Module includes ALL electronics (VFD, one chip controller, driver IC and local DC/DC power supply) basic system requirements are 5V rail at around 800mA
Do not be lulled into thinking that at 5V supply rail this can be handled carelessly - onboard high voltage supplies exist for the VFD - DO NOT TOUCH while in operation!
Character display is by a 5 x 7 dot matrix
Screen brightness can be controlled in 5 step levels
Interface can be parallel or serial data (1200 to 9600) - selectable
Built in self test function
Both the self test and parallel/serial selection are easy to access via the onboard jumper positions J1 & J2 and pin 16 of the connector.
A great high quality dot matrix display module for the experimenter, R&D purposes or even service repair.
On the experimental side, I know a few users of these have interfaced them to their Arduino projects.
Here is a link to a page that describes the technical aspects of the display (albiet the 2 line version) and lots of other helpful information.
https://playground.arduino.cc/Main/M204SD01B
Supplied in ESD foam packaging along with an outer ESD bag
FUTABA M404SD01 4 x 40 Dot Matrix Display Module
Futaba
Was:
$120.00
Now:
$40.00
- Condition:
- Used
- Minimum Purchase:
- 1 unit
- Maximum Purchase:
- 1 unit
- Shipping:
- Calculated at Checkout
Condition exactly as described
Non-returnable used product