Used extensively in vintage broadcast and domestic video equipment, particularly video camera "tether cables"
JAE (Japan Aviation Electronics Industry Ltd) - Multi-pin circular connector
Made in Japan
Circa 1970's ~ 1980's - I cannot find any reference to these in current JAE catalogues
Series: 9101
Part # SRCB641 6-14p
Those identification numbers are stamped into the main body
All metal diecast body with a rubber exit boot
Circular pattern
Twist locking
14 pins MALE
Arranged as 4 rows, top is 3 pins next row 4 pins, next row 4 pins and finally a row of 3 pins
Solder well terminations at the rear of the plug
DIMENSIONS:
Total plug length (excluding the boot): 62.75mm
Front body diameter: 21.75mm
Slip on locking sleeve diameter: 26.45mm
Inside diameter of the plug "face" (where the pins are): 14mm
Boot diameter (maximum cable diameter): 11.75mm
DISASSEMBLY:
These old connectors can be confusing....
The front section (with the pins) unscrews from the main body. Once the front section is removed, this allows the sleeve to be removed in a forwards direction. That's basically it, no screws to mess around with.
COSMETIC CONDITION:
USED
Clean
No damage to pins or the solder wells
Solder wells clean and ready to use once again.
