HISTORY:
Sustainability is the name of the game! Anything (that has been tested and still functioning properly) should be repurposed creating saving in wasted Ee and reducing the poisoning our environment when items are buried in the earth at the local tip needlessly.
Never heard of Ee? It is a concept that creates a measurement of ALL things (not just electronics) that humans have made and the energy used in obtaining the raw material, processing the materials right through to a finished product and even should include the shipping of the item to the distributors/retailers.
If you would like to know more about Ee values, please take a look HERE
This Metallised polypropylene capacitor is USED.
Ex laboratory equipment "pulls"
TESTED (see below)
NDK (JAPAN) - Polypropylene Capacitor (1)
Manufactured in Japan
Value: 0.1uF 630V
Tolerance: +/- 20%
Metallised polypropylene film wrapped in Yellow adherent tape, ends epoxy sealed
Axial
Excellent frequency characteristics
Low dissipation factor at high frequency
Long term stability
DIMENSIONS:
23mm L x 10.6mm Height x 5.75mm thickness
All leads have been cut, lead length minimum is 4.5mm and maximum 13.8mm
APPLICATION TYPES:
Wave-form shaping, delay timing circuits
Switching power supply input filtering
DC blocking and output filters
High current, high voltage, high-frequency applications
TESTING:
As these are used, I have tested every capacitor and all are reading on the high side of the nominal value, the measurements range from 122nF ~ 128nF - still well within the 20% tolerance band
COSMETIC CONDITION:
USED
CLEAN
All leads have been cut, some quite short so these caps would be most suitable for "point to point" wiring
Leads have all been "pre-tinned" ready to use once again
Stored in sealed, clear plastic packets
*** Where the photograph shows multiple components, this advertisement is for ONE capacitor only - not all that are shown ***