HISTORY:
Slowly "moving through" more boxes of components that have been carefully "extracted" from high quality donor audio equipment of days gone by ... these F & G's were removed from a fully working German audio amplifier which had some cosmetic damage to the case rendering the equipment unsuitable for use in it's original form - yes, it became a "component farm"!
USED
Tested (see below)
F & G (Felten & Guilleaume Germany) - Box Film Capacitor
Made in Germany
Distinctive "Burnt Orange" resin encased
KSM Series
10000pF (10nF)
63V DC
PCB radial mount
Full part ID printed on the top
10 000 F
63/40
Full part ID printed on one side
F &G
KSM J4
Tolerance: not stated or identified on the component or using datasheets but I suspect we are looking at ± 1%
DIMENSIONS:
12.5mm length x 10mm x 9.85mm thickness
PCB pins are 3mm length (not cut but only just long enough for reuse thru-hole) x 0.7mm thick wire
TESTING:
There are only four that I have found so far, EACH has been tested ...
9907pF
9829pF
9832pF
9792pF
(One is inside 1% of the nominal value, three just outside the 1% band and all on the 'low' side)
COSMETIC CONDITION:
NEW
CLEAN
NO body damage
Leads are clean & shiny but pretty short
Stored and will be supplied together or individually (depending upon how many are ordered) in a sealed clear plastic packet
These are NOT an ongoing supply, once these have "left the house" there will be no more ...
