USED Ex commercial HF transmitter
Another accessory from the spare parts drawers, this socket is "like new" with the only signs of usage being a very small amount of solder on the centre pin and the chassis lug.
which I suspect was never required! Not a lot of RF transfers required the RCA socket, I am guessing perhaps it was on hand in the old analog video days, feeding RF into the video equipment but that's a long shot because I would expect the signal generators to use BNC output sockets.
UNBRANDED - RF Adapter
Country of origin unknown
Nickel plated metal
PL259 bulkhead socket
I have looked closely and carefully all over the adaptor and there are no identification stamps/markings at all - the only thing that is "slightly different" is the centre dielectric material looks to be a clear epoxy resin material i.e from the front of the socket and I easily see right through to the rear.
Part number: unknown
Solder cup termination
Thread has a flat spot so when it is fitted to an appropriate panel cutout, the socket will not rotate
Supplied with the outer (shield) solder tab ring, lock ring and the nut
DIMENSIONS:
17.5mm length x 14mm diameter
COSMETIC CONDITION:
USED
CLEAN
NO body damage, not marked at all - very shiny and for all intent and purposes, like new
NO pin socket damage
Supplied in a sealed clear plastic packet
