N Connector is branded/stamped as a LINK, made by Gordon Technologies in Melbourne - well known manufacturers of high quality RF connector products which are widely used throughout the telecommunications, broadcast, computer, defence, aviation and electronic manufacturing industries.
This RF interconnect lead is suitable for use in mission critical consumer, commercial and aerospace environments for purposes such as signal transfer applications, interconnects, test cables, and radio systems.
LINK (Gordon Technologies) - RF Interconnect Lead (Incomplete)
N-Male with 80cm 'tail' terminating with bare conductors
80cm length
Nominal Impedance: 50 Ohm
Coax is RG-58C/U MIL-C-170
N connector is a crimp style
N Connector (female) has stamped on the body
LINK B30-033C
NOTE: It would be best to use this interconnect lead in the VHF region, the N connector is fine well up into the GHz range but RG-58C/U coax is only for VHF frequencies at best, probably not useful much above 400MHz due mainly to high attenuation at higher frequencies e.g 79dB @ 1GHz
COSMETIC CONDITION:
Clean/shiny connector - no damage
Coax is completely undamaged - no kinks, cuts or other damage.