null Skip to main content

Flexible AVICO Power Adapter BE500 3-4.5-6-7.5-9-12 @500mA Maximum Polarity Reversible USED Tested

Avico

MSRP: $150.00
$5.00
(You save $145.00 )
Condition:
Used
Minimum Purchase:
1 unit
Maximum Purchase:
1 unit
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

HISTORY:

USED

Workshop spare power adapter, one of many that I have and are now looking for new owners ...

Flexibility is the name of the game with this adaptor, a range of slide switch selectable output voltages and the tip of the DC plug is reversable so you can have the centre pin + or -

This is a linear power supply, unregulated with a maximum current capability of 500mA @ 12V (6 Watts power approximately) - as the voltage is lowered then more current can be supplied e.g at 6V DC output you could expect to be able to draw around 1 Amp from this adaptor.

 

AVICO - Power Adapter

Country of origin is not indicated but it is most likely to be made in China

Technology: Linear (basic unregulated)

Model: BE500

AC voltage input 240V AC (fixed) and has a 'wall plug' 3 pin Australian plug

Switchable across the range 3V ~ 12 Volt DC output with a maximum current drawn of 500mA @ 12V setting

Output is a female DC type plug 9mm barrel length x 4mm OD

This output plug can be 'pulled off' and reversed to suit the equipment being powered.

Supplied ready to go ...

DIMENSIONS:

90mm x 65mm x 40mm depth

WEIGHT:

400g

TESTING:

I test all of my used items, whenever possible, the readings below are ALL with no load so they will be higher voltage until equipment is actually drawing current

Power ON RED led indicates

Measured the DC voltages:

Setting               Actual voltage reading (NO load)

3.5V                        4V

4.5V                        5.9V

6V                           7.4V

7.5V                         9.4V

9V                            11.15V

12V                           15V

DC lead length 1.75 metre

COSMETIC CONDITION:

CLEAN

NO damage to adapter body

Cooling 'slots' around the transformer are clean and clear of dust & dirt

Slide switch (to select the voltage output) moves smoothly to each 'click' position, nice positive action that stays in place once set.

NO damage to the or the DC lead or reversible plug

If you wished to use your own reversible plug, the pin spacing is 3mm and the plug pins look to be 1.25mm thick (a bit hard to get the micrometer inside the plug)

Now that testing is finished with, I have placed this adapter into a sealed clear plastic packet ... it is now patiently waiting for a new owner!

USED Exactly as described