Fully functioning Technics SA-104 Stereo Receiver has been "parted out" due to extensive casing damage.
Technics Stereo Receiver - SPARE PART ONLY
Model: SA-104
Part #: SLT5M209 (ETP66PS244A) - AC power transformer
Complete AC power transformer including On/Off push switch (with capacitor fitted), fuse sub pcb
All components are fully functioning and all wiring remains intact, no leads have been shortened.
Front panel on-off (push on/push off) is working fine, locks in position correctly (NOTE: no button is supplied - the knobs and buttons are advertised separately)
This is the Australian 240V input version
Outputs checked after removal:
One winding on the secondary, primary winding is centre tapped, the centre colour coded wire being Black. There is also a second winding providing the lower voltage for the panel lamps.
Black - 0V
Blue - 23.3V
Blue - 23.3V
Brown - 11.7V
The two blue colour coded outputs are exactly as the service manual states they should be. The brown output is a little higher than the service manual indicates (10V) but this is used only for the incandescent lamps and my measurements were made under NO load conditions anyway.
I have left a piece of the original AC power lead connected so it is easy to identify active/neutral although it is screen printed on the sub-pcb anyway.
Packed in a sealed plastic bag
