HISTORY:
Removed from a YAMAHA Tuner, type T-420A
SPECIAL NOTE:
Please look at the photograph, in this advertisement I am offering ONLY the front panel switches which are all PCB mounted behind the buttons on the right hand side of the panel, the only exception to this is the power ON-OFF switch which is NOT included and is a separate switch from the PCB.
PCB with sealed microswitches only - NOT the front mechanical actuators, they are available HERE
I have separated the two items because so often the front panel switches mechanically fail but the actual PCB mounted switches are fine OR vice versa.
YAMAHA - Front Panel Switch PCB Assembly
Ex Yamaha T-420A AM/FM Tuner
Part # XA644-2 TP-K2-T
Single sided PCB containing 14 microswitches (push On release OFF) which are completely sealed - NOT membrane switches. The only other components on the PCB are 4x small signal switching diodes and the interface cabling (8 way)
Unfortunately both ends of this cable are soldered into the Switch PCB and Main PCB which means I have had to lift this off the mainboard - a plug/socket would have been so much nicer! Installation of the PCB means you will need to solder the cable to the main board.
COSMETIC CONDITION:
USED
CLEAN
NO damage to the PCB or the flat 8 way interface cable
ALL switches are working properly
I have now packed this switch assembly PCB into a sealed, clear plastic package to keep it in good condition while waiting for another t-420A tuner to "live in"
