Removed from another of my studio off-air monitoring tuners, the NAD 4155 (yes I had two of these nice tuners, one was a "backup" unit)
Main board has failed and the equipment was not considered economical to repair, now it has been "parted out"
NAD AM/FM Tuner (SPARE PART ONLY)
Model: 4155
Made in Japan
1985 release
PART:
Complete inner front panel assembly which comprises of...
Power button bezel and green button
3 button bezel for the Mute/Mono/Blend buttons (Buttons are NOT included for these - they are with the switch assembly)
Display window front panel
Complete row of memory buttons, including the AM/FM select button
Radio scan up and down pivotted button
Radio scan push on - push off button
If in doubt, please refer to the photographs - they show EXACTLY what I am offering
All of these components are cosmetic and there are NO switches included, just the hardware and buttons, their springs etc
COSMETIC CONDITION:
Very good - excellent
All buttons have normal movement and none are damaged in any way
NOTE: To change this panel on your 4155, you need to VERY CAREFULLY lift the existing panel away from the metal front panel (from the rear) - it helps a lot to score all around the panel with a "Stanley" knife. NAD used a "flexible glue compound" all around the edges of this panel and it is this seal which you must very carefully break. Once done, the panel will easily lift out from the front panel. It is not a difficult task but needs to be done with patience and care.
I have cleaned off ALL of the old glue residue so this panel is ready to fit into a new front panel.
All parts are now sealed in plastic to preserve their condition.
