After closing down our audio post production facilities quite a while ago, finally I am sorting out lots of cables, connectors and some equipment I had left after sending most of it over to Europe (Studer gear)
Here is a pair of medium power (less than 200W RMS) speaker cables removed from one of the NF monitor setup's in the mastering suite.
Don't get me started but there is a LOT of "snake oil" salesmen when it comes to speaker cables and I am not about to discuss the virtues or otherwise of EXTREMELY expensive speaker cables (Monster etc) but suffice to say, these cables I am offering are great general purpose speaker interconnects. Nice flexibility, medium weight, flat top & bottom for easy routing and the cross sectional area is good for medium power levels.
This speaker cable had originally been cut to length from the reels to suit our studio needs.
Two separate lengths of cable are supplied, one is 4 metre and the other is 3 metre. Both are supplied together, they will not be separated.
RESPONSE - Loudspeaker Cable
OFC High Definition Series
Flat cable Sky Blue sheath
Multi-strand cores
DIMENSIONS:
External: 10.9mm wide x 5.5mm height
External (each core): 4.25mm x 5.5mm height
Area between cores can be relatively easily separated (2mm wide)
Core: Copper 2mm diameter (multi-strand)
Weight/metre: 115 grams
One cable is 4 metres and the other is 3 metres length
COSMETIC CONDITION:
USED
CLEAN
NO sheath damage (nicks etc) at all
NO labelling or other intentional markings on the sheath
ONE end of each cable has had the core soldered to form a solid conductor for inserting into the monitor terminals, whereas the other end is bare copper
NO oxidisation to either cable (in other words the dreaded Green lurgee ... a sure sign moisture has penetrated your sheath)
These two cables are now nicely rolled up and within a sealed clear plastic pack, awaiting a "purpose in life" once again ....
