Ex professional workshops spare part
BRAND NEW
Old Stock
These are the "tough Moma's" in the world of audio plugs, thicker and stronger than your standard metal jack plug and made by the very respected
SWITCHCRAFT (USA) manufacturer.
SWITCHCRAFT - 1/4" Jack Plug
Manufactured in USA
Type: 226
If you are looking for the TRS version (236) please go HERE
Stamped into the plug end section (in an arc) is
SWITCHCRAFT
BEWARE of fake or "rip off" 226's, look for the STAMPED SWITCHCRAFT on the plug - fakes of these plugs abound because they are not cheap (Element 14 lists at A$14 each) which means it is worthwhile for some dodgy manufacturers to rip off the Switchcraft name.
Orientation: Right Angle
Type: Tip/Sleeve (used for "mono" single channel audio or unbalanced leads - also commonly referred to as Phone plugs)
Finish: Chrome plating on an all metal body with knurled finger grips
Heavy duty case construction
Standard cable sheath clamping system but much stronger than your "standard" plug
I am NOT supplying any rear "strain relief" accessory
Inner plastic insulating sleeve which fits over the termination points is supplied
Solder tag termination to the tip connection
DIMENSIONS:
31mm plug length
Barrel body set at a right angle to the plug is 12.75mm diameter x 30.25mm length
7.25mm diameter rear entry hole
WEIGHT: 25g (much lighter than it's big brother, the 188)
COSMETIC CONDITION:
BRAND NEW
CLEAN
Chrome finish has a high lustre
Solder termination areas are clean and shiny
These have been stored as the three separate components and this is the way they will be supplied - not assembled. The major reason for this is that to fit the body over the plug I would need to slightly push in the cable grip tabs and I would prefer not to do that.
*** Where the photograph shows multiple items, this advertisement is for ONE ONLY not all that are shown!
