null Skip to main content

PIONEER CD Player Model: PD-5010 Tray Front Plate SPARE PART

Pioneer

$4.00
SKU:
CHKGUM7350
Condition:
Used
Minimum Purchase:
1 unit
Maximum Purchase:
1 unit
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

 As removed from a first generation CD player, the Pioneer PD-5010

 

These CD mechanism front plates always seem to go missing or get broken, this item will solve the problem

Offered as spare parts for the same machine or possibly other Pioneer or non-Pioneer equipment - please read the description and check thoroughly before purchasing

 

Pioneer CD Player PM-5010 SPARE PART

CD Tray - Front Plate ONLY

All black with this text:

Top right section has a large "Compact Disc Digital Audio" logo

Lower left section has SENSORED TRAY

No other printing at all - no brand name, model number etc

 

To remove or replace these, you must first open the CD tray (push eject or do it manually if the drive has no power)

The face plate has slots down each side, these mate with corresponding ridges at the front of the CD tray.

When the front panel has been carefully pushed down far enough, two small catches on the CD tray engage with two small rectangular cutouts inside the face plate, locking the face plate in place.

To remove is the reverse procedure but it is very important to gently allow the two "fingers" on the CD tray to release from the face plate first, otherwise you are going to break the plastic!

I have seen these face plates on other "older" CD player equipment so just because your CD tray isn't in a Pioneer machine does not necessarily mean it will not fit.

FACE PLATE DIMENSIONS:

150mm wide

35mm height

7mm thick

2 locking rectangular slots (inside the face plate) are 89mm apart

 

COSMETIC CONDITION:

Clean

No scratching or marks

 

Since removal, this face plate has been stored in sealed plastic and will be supplied the same.

Tested as described in the description This item is not returnable, UNLESS not as described