I have decided to "part out" an old CDC ST 510 turntable, this is another couple of spare parts for this machine.
C.D.C (Chup Denki Corporation) in Saitama, Japan
Basic Entry level turntable
Plastic plinth
Pressed metal base
Aluminium diecast platter
Semi-Automatic
C.D.C ST 510 Turntable Tone Arm Rest/Lock & Anti-skating control
Made in Japan
Parts supplied:
1x complete tonearm rest with the washer and nut
1x Anti-skating knob and some of the mechanicals but NOT the complete anti-skate system. Offered in case someone has one of these turntables and the Anti-Skating knob is damaged or has even been removed!
Notes: if someone was thinking of using the tonearm rest with another turntable, it may be difficult because it was originally mounted on the raised tonearm base. The shaft is quite short, details are:
Tonearm Rest:
Construction is all black plastic
Shaft: 8mm x 7mm diameter plastic - securing screw goes in from the bottom (supplied)
Tonearm lock diameter 6-7mm
Lock sits 10mm from the base (as measured from the base of the tonearm shaft to the centre of the tonearm lock loop)
CONDITION:
No damage to any of the components
All parts are clean
Stored and supplied in a sealed plastic bag