Excellent quality and flexibility for Eurocard prototyping/project Synth or design R&D
Eurocard standard rack mounting frame - ex broadcast equipment
Very high quality build and secured with star head threaded bolts.
This unit is supplied with 12x sets of red card guide rails
Depth of this unit is 257mm front to back
Depth for the cards is very flexible, prepunched holes all the way down the sides, each is 15mm apart so this allows for many different card lengths to be used.
Includes internal aluminium brackets (removeable) for the PSU
Ex broadcast equipment
3RU aluminium eurocard frame
Top & Bottom extruded mesh shield - removable if you have no need of this but very handy if you need ventilation, view inside and also provide RF/Noise protection - better than an open frame for this purpose.
Standard 19" rack width
Supplied exactly as pictured, the photographs tell the story
NOTE: Rack ears are NOT included
These units are perfect for prototyping/development of equipment design by providing user flexibility in the location and fitting of internal cards.
This is your basic building block, you will need card guide rails, nuts, bolts etc - we have lots of these if you need them.
Also a quantity of card related hardware such as support elbows, front pull handles, card panel lock bolts etc
All bolts are threaded, not self tappers!
These are high quality precision frames, working with these is a bit like playing with Meccano (if you can remember Meccano), very flexible development environment.
