Excellent quality and flexibility for Eurocard prototyping/R&D
Eurocard standard rack mounting frame (#2)
Manufacturer is unknown but suspected from Germany, very similar in style to the IRT frames - very high quality build and secured with four threaded bolts.
This unit has 2 sets of rear rails, where the cards use the first pair of rails and the most rear rails are used for interconnects/backplane.
Position location of the horiztonal rails can be spaced 60mm, 60mm, 120mm & 60mm from the front rails
Ex broadcast equipment
3RU aluminium eurocard frame
Maximum frame depth is 295mm
OPEN style i.e it has the sides of course, front/rear rails but NO top or bottom plate or shield.
Standard 19" rack width
Supplied exactly as pictured, the photographs tell the story
Note: Rack ears are built into the design, you cannot remove them
Supplied exactly as shown in the photographs
These units are perfect for prototyping/development of equipment design by providing user flexibility in the location and fitting of internal cards.
This is your basic building block, you will need card guide rails, nuts, bolts etc - we have lots of these if you need them.
Also a quantity of card related hardware such as support elbows, front pull handles, card panel lock bolts etc
All bolts are threaded, not self tappers!
These are high quality precision frames, working with these is a bit like playing with Meccano (if you can remember Meccano), very flexible development environment.
Note: although a 19" 3RU frame, we are happy to carefully disassemble and ship as a "flat pack" because that will be cheaper to ship although the buyer then must reassemble the frame (easy)
