Rohde & Schwarz Video Noise Meter Model UPSF2 E2 Module Card
The UPSF2 is designed for the measurement of spurious modulation from the television transmitter (see the block diagram providing a typical setup)
**E2 MODULE ONLY**
Old technology although still in use until 2002 at an Australian National Broadcast facility, but this module could be useful for a UPSF2 restoration project
OR
Cannibalise for parts! (see description below for parts of "note")
MODULE: Chroma Phase
Part number: 342.0376.02
Slot position A5
COSMETIC CONDITION:
Clean with no damage at all
TECHNICAL DETAILS:
Double sided PCB
Closed Frame, 4 top screws reveal the top and bottom of the module
No SMD
Passive components include 2x Bournes 3006 trimpots, Roederstein series EK electro's, MKT poly capacitors, ceramic capacitors, polystyrene capacitor
Active components (none are in sockets): various LS, 4000 & 74F series logic, BCY series transistors (59/79/81's), 2N2905A transistor, 2x LM710CN (voltage comparator), PMIPM 156, LM310, 2x LM082, CA3054 (2x differential amps) & a small unidentified metal block which has access for external adjustment. PCB for this block is part number 342.0299.02
TESTING:
Fully functioning prior to removal, equipment now obsolete (broadcast analog video test equipment)
Stored reassembled after the photograph was taken and supplied in sealed plastic
