WARNING:
This PIR detector is intended to be directly wired into the electrical wiring system and this MUST be undertaken by suitably qualified persons, usually a licensed Electrician. Not difficult to instal but the installer absolutely must be fully aware of wiring practices and safety standards when both handling and installing this sensor.
We bought a number of these PIR sensors quite a while back to enhance our business premises security, this unit being a "spare" that was kept in case a replacement was required - it never was.
This advertisement is for the PIR sensor ONLY, the equipment being switched (usually IR or Visible light floods) is the responsibility of the purchaser.
ROBUS - PIR Sensor
Designed & manufactured in Ireland (LED Group)
Model: R180
Case colour: WHITE
8m coverage range (at a height of 2.5 metres)
Angle of detection: 180 degrees
ON time adjustable 10 Seconds ~ 10 Minutes
LUX control to prevent operation during daylight hours (if desired)
IP44 rated
At installation, warm-up time is 50 Seconds then the unit is fully operational
Manual ON facility ... turn on the sensor using an external switch, using a double ON-OFF switch action within 4 seconds and the controlled lamps will remain on for 8 hours fixed time period.
To return to the AUTO mode, repeat the above switching procedure.
Capable of controlling 1000W (Incandescent) or 300W (Flourescent) lamps
DIMENSIONS:
71mm wide x 85mm height x 130mm front~back
WEIGHT: 360g
COSMETIC CONDITION:
NEW Unused
CLEAN item and packaging
NO damage to either the sensor or the packaging box.
